Symptoms :
1.Phone Is not powered on / dead
2.Phone only show red blinking ( charging led indicator ) when power key is pressed
3.Cannot read gdfs when ” identify ” on setool
Tools & Materials :
1.Setool Box with V1.01 or Latest software installed
2.Setool Cable set
3.K800i Gdfs file ( included on Setool folder )
4.K800i Erom file ( included on Setool folder )
5.Internet Connection
Step By Step :
1.Open Setool Software
2.Pick ” Empty Fill Repair ” Tab
3.Pick K800i Model
4.Pick ” Setting ” Tab
5.Check ” Signed Mode “
6.Back to ” Empty Fill Repair ” Tab
7.Click ” Recovery “, wait until process done
8.Add K800i Gdfs file
9.Add K800i Erom file ( pick CID 53 )
10.Connect phone to cable
11.Click ” Flash “
12.Wait until all process done
13.For last step, do Identify and confirm that gdfs is legiled.
14.All Done
Here’s the log operations :
First Identify
RUNNING v 1.01/UNI
CARD SERIAL 00xxxxxxx
USBFLASH DRIVER VERSION 02.02.00.05
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID: 897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:359xxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
can’t get packet start.
packet not acknowledged (17)
setGDFS_params failed
failed to setup GDFS
Elapsed: 72 secs.
Repairing gdfs
RUNNING v 1.01/UNI
CARD SERIAL 00xxxxxxxxxx
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:100000000000
RESET MODE STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA
FLASH ID: 897E
GOT SEED:034A77682380B07A15F00858
P96 AUTH PASSED
OTP: LOCKED:1 CID:51 PAF:1 IMEI:3590xxxxxxxxxxxx CERT:N/A
PHONE SUCCESSFULLY RESET TO DEVELOPER STATE
Elapsed: 26 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:359xxxxxxxxxxxxxxxxx CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 897E
writing “D:Master FlasherSe tool 3v1.01gdfs_in_ssw_formatdb2020K800_GDFS_SSW.ssw”
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks…
writing “D:Master FlasherSe tool 3v1.01eromsdb2020DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw”
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 40
Will flash 2 blocks…
Setting up GDFS…
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS…
ALL UNLOCK/LOCK CODES SET TO “75381610″
SIGNING…
Elapsed: 48 secs.
Identify after repair
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID: 897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:3590xxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
Model (from GDFS):K800i
Brand:Generic
MAPP CXC article: 2007-12-13 16:25 CXC1722434_TEMS
MAPP CXC version: R2B
Language Package: TEMS
CDA article: CDA12345678/123
CDA version: R2A
Default article: cxc1722435
Default version: R2B
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
RESTORATION FILE NOT PRESENT
“2007-12-13_07-12-13 16:25 CXC1722434_TEMS”
YOU MUST PERFORM FULL FLASHING
WHEN “ALTERNATIVE SECURITY BYPASS” ENABLED
